Pioneer KEH-P4010R Operation Manual page 16

MAN-KEH-P5010R-GB_B.fm Page 16 Friday, October 6, 2000 2:22 PM
The Loudness function compensates for deficiencies in the low and high sound ranges
at low volume. You can select a desired Loudness level.
8/2
4/6
LOW (low) _ MID (mid)
_ HI (high)
The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front
imaging by cutting mid- and high-range frequency output from the rear speakers,
limiting their output to low-range frequencies. You can select the frequency you want
to cut.
When the F.I.E. function is deactivated, the rear speakers output sound of all
frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to
prevent a sudden increase in volume.
8/2
4/6
100 _ 160 _ 250 (Hz)
• After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu,
and adjust front and rear speaker volume levels until they are balanced.
• Switch the F.I.E. function OFF when using a 2-speaker system.
The SLA (Source Level Adjustment) function prevents radical leaps in volume level
when switching between sources. Settings are based on the FM volume level, which
remains unchanged.
" "
8/2
The display shows "+4" – "–4".
• Since the FM volume is the control, SLA is not possible in the FM modes.
• The MW/LW volume level, which is different from the FM base setting volume level, can be
adjusted similar to sources other than tuner.