Pioneer KEH-P4010R Operation Manual page 7

MAN-KEH-P5010R-GB_B.fm Page 7 Friday, October 6, 2000 2:22 PM
The following explains the initial operations required before you can listen to music.
• Loading a cassette in this product. (Refer to page 8.)
Each press changes the Source ...
Each press of the SOURCE button selects the desired source in the following order:
Tuner ] Tape ] Multi-CD player ] External Unit ] AUX
• External Unit refers to a Pioneer product (such as one available in the future) that, although
incompatible as a source, enables control of basic functions by this product. Only one
External Unit can be controlled by this product.
• In the following cases, the sound source will not change:
* When a product corresponding to each source is not connected to this product.
* When no tape is set in this product.
* When no magazine is set in the Multi-CD player.
* When the AUX (external input) is set to OFF. (Refer to page 18.)
• When this product's blue/white lead is connected to the car's Auto-antenna relay control
terminal, the car's Auto-antenna extends when this product's source is switched ON. To
retract the antenna, switch the source OFF.
Hold for 1 second
This product's AF function can be switched ON and OFF. AF should be switched OFF
for normal tuning operations. (Refer to page 10.)
*
4/6
Manual Tuning (step by step) 0.5 seconds or less
Seek Tuning 0.5 seconds or more
• If you continue pressing the button for longer than 0.5 seconds, you can skip
broadcast stations. Seek Tuning starts as soon as you release the button.
• Stereo indicator "%" lights when a stereo station is selected.
*
Preset station recall 2 seconds or less
Broadcast station preset memory 2 seconds or more
• Up to 12 FM stations (6 each in F1 (FM1) and F2 (FM2)) and 6 MW/LW stations
can be stored in memory.
• You can also use the 8 or 2 buttons to recall broadcast stations memorized in
buttons 1 through 6.
F1 (FM1)
] F2 (FM2)
] MW/LW