Inserting And Ejecting The Memory Stick - Samsung SCD24 Owner's Instruction Manual

ENGLISH
Digital Still Camera mode

Inserting and ejecting the Memory Stick

Inserting the Memory Stick
1. Turn the Power switch to OFF.
2. Insert the Memory Stick into the CARD slot located
beneath the camcorder, in the direction of the arrow.
Ejecting the Memory Stick
1. Turn the Power switch to OFF.
2. Push the Memory Stick, then it comes out of the
camcorder automatically.
3. Pull out the Memory Stick.
Reference
If you set the camcorder to M.PLAY mode,
the last recorded still image appears.
- If there are no recorded images on the Memory
Stick, NO STORED PHOTO! or NO STORED
MPEG4! and will display on the screen.
While recording, loading, erasing, or formatting, do not
turn off the power or change the mode.
Please turn the power off before you insert or eject the Memory Stick.
You could lose data on the Memory Stick.
Do not allow metal substances to come in contact with the terminals of
the Card.
Do not bend the Card.
After pulling the card out from the camcorder, please keep the Memory
Stick in a soft case to prevent static shock.
The stored contents may be changed or lost as a result of misuse, static
electricity, electric noise or repair.
Save important images separately.
Samsung is not responsible for data loss due to misuse.
If the USB cable is connected to the camcorder, the
(S.SHOW), (FWD),
are not available in M.PLAY mode.
81 81
,
(REV) buttons
1.
2.
1.
2.
3.
-
81 81