Date/Time - Samsung SCD24 Owner's Instruction Manual

ENGLISH
Advanced Recording

DATE/TIME

The DATE/TIME function works in CAMERA, PLAYER, M.REC
and M.PLAY modes.
The date and time are automatically recorded on a special data area of
the tape.
1. Press the MENU button.
The menu list will appear.
2. Turn the MENU DIAL to highlight VIEWER and
press the ENTER button.
3. Turn the MENU DIAL to highlight DATE/TIME.
4. Press the ENTER button to select the sub-menu.
5. Using the MENU DIAL, select the DATE/TIME mode.
You can choose to display - the OFF, DATE, TIME,
DATE/TIME
- OFF only
- DATE only
- TIME only
- DATE & TIME
To return to the previous menu, highlight the
DATE/TIME in the middle of the and
press the ENTER button.
6. To exit, press the MENU button.
Reference
The DATE/TIME is not affected by the OSD ON/OFF
(DISPLAY) button.
The DATE/TIME will read "- - -" in the following
conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the DATE/TIME in the
Camera's memory.
- When the lithium battery becomes weak or dead.
Before you can use the DATE/TIME function, you must set the Clock.
See CLOCK SET on page 37.
DATE/TIME
1.
CAM MODE
2.
INITIAL
CAMERA
A/V
MEMORY
3.
VIEWER LCD ADJUST
DATE / TIME
TV DISPLAY
4.
5.
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
6.
CAM MODE
VIEWER SET
DATE / TIME
DATE
TIME
DATE&TIME
-
-
-
- OFF
- DATE
- TIME
-
DATE/TIME
51 51 51 51