Inserting And Ejecting A Cassette - Samsung SCD24 Owner's Instruction Manual

ENGLISH
Preparation

Inserting and Ejecting a Cassette

When inserting a tape or closing a cassette holder, do not apply excessive
force.
This may cause a malfunction.
Do not use any tapes other than Mini DV cassettes.
1. Connect a power source and slide the TAPE
OPEN/EJECT switch and open the cassette
door.
- The cassette holding mechanism rises
automatically.
2. Insert a tape into the cassette holder with the
tape window facing outward and
the protection tab toward the top.
3. Press the area labelled PUSH on the cassette
holding mechanism until it clicks into place.
- The cassette is loaded automatically.
4. Close the cassette door.
- Close the door completely until you
can hear a "click".
Reference
When you have recorded something that you wish to keep, you
can protect it so that it will not be accidentally erased.
a. Protecting a tape :
Push the safety tab on the cassette so that the hole is
uncovered.
b. Removing the tape protection :
If you no longer wish to keep the recording on the cassette,
push the write-protect tab back so that it covers the hole.
•
How to keep a tape
a. Avoid places with magnets or magnetic interference.
b. Avoid humidity and dust prone places.
c. Keep the tape in an upright position and avoid storing it in
direct sunlight.
d. Avoid dropping or knocking your tapes.
1 2
COMPARTMENT THE IN PUSH NOT DO
3 4
COMPARTMENT THE IN PUSH NOT DO
push
a. SAVE
b. REC
1.
-
2.
3.
-
4.
-
a.
b.
•
a.
b.
c.
d.
27 27