ENGLISH
IEEE 1394 Data Transfer
System requirements
CPU : faster Intel
®
Pentium III™ 450Mhz compatible.
Operating system : Windows
Main memory : more than 64 MB RAM
IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV connection cable
1. Set the power switch to PLAYER
mode.
2. Connect the DV cable (not supplied)
from the DV IN/OUT port of
the camcorder to the DV IN/OUT port
of the other DV device.
Make sure that DV IN appears on
the screen.
3. Press the START/STOP button to begin
REC PAUSE mode.
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
If you want to pause recording momentarily,
press the START/STOP button again.
6. To stop recording, press the
Reference
When using this camcorder as a recorder, the pictures that appear on a
monitor may seem uneven, however recorded pictures will not be affected.
Operations are not guaranteed for all of the recommended computer
76
76
environments mentioned above.
®
98SE, ME, XP, Mac OS (9.1~10.2)
(STOP) button.
IEEE 1394
CPU Intel
®
Pentium III™ 450Mhz
Windows
®
98SE, ME, XP, Mac OS 9.1~10.2
64 MB RAM
IEEE1394
1.
2.
3.
4.
5.
6.
PAUSE
76
76