Inserting And Ejecting The Memory Stick - Samsung VP-D97I Owner's Instruction Book

ENGLISH
Digital Still Camera mode

Inserting and ejecting the Memory Stick

Inserting the Memory Stick
1. Turn the Power switch to OFF.
2. Insert the Memory Stick into the Memory Stick slot located beneath the camcorder, in the
direction of the arrow.
Ejecting the Memory Stick
1. Turn the Power switch to OFF.
2. Push the Memory Stick, it will move out of the camcorder automatically.
3. Pull out the Memory Stick.
Do not attempt to pull the Memory Stick out without first pushing it in.
Notes
If you set the camcorder to M.PLAY mode, the last recorded image appears.
- If there are no recorded images on the Memory Stick, "NO STORED IMAGE!" will display
on the screen.
Do not turn the power off while recording, loading, erasing or formatting.
Please turn the power off before you insert or eject the Memory Stick.
You could lose data on the Memory Stick.
Do not allow metal substances to come in contact with the terminals of the Memory Stick.
Do not bend, drop or apply strong shock to Memory Stick.
After pulling the Memory Stick out from the camcorder, please keep the Memory Stick in a soft case to prevent static shock.
The stored contents may be changed or lost as a result of misuse, static electricity, electric noise or repair.
Save important images separately.
Samsung is not responsible for data loss due to misuse.
If the USB cable is connected to the camcorder, the
are not available in M.PLAY mode.
82 82
(FWD), (REV), , S.SHOW, MULTI-DISPLAY buttons