Connecting A Power Source; About The Operating Modes - Samsung VP-D371i Owner's Instruction Manual

ENGLISH
Preparation

Connecting a Power Source

There are two types of power source that can be connected to your
Camcorder.
- The AC Power Adapter: used for indoor recording.
- The Battery Pack: used for outdoor recording.
Using a Household Power Source
Connect to a household power source to use the
Camcorder without having to worry about the
battery power. You can keep the Battery Pack
attached; the battery power will not be
consumed.
1. Turn the [Power] switch to [OFF].
2. Connect the AC Power adapter (AA-E9
TYPE) to a wall socket.
The plug and wall socket type may differ
according to your resident country.
3. Connect the DC cable to the DC jack of the Camcorder.
4. Set the Camcorder to each mode by holding down the tab on the
[Power] switch and turning it to the [CAMERA] or [PLAYER] mode.

About the Operating Modes

The operating modes are determined by the position of the [Power]
switch and the [Mode] switch.
Set the Operation Mode by adjusting [Power] switch and [Mode]
switch before operating any functions.
Mode Name <Camera Mode> <Player Mode>
[Power]
Switch
[Mode]
Switch
(VP-D375W(i)/
D975W(i) only)
M.Cam Mode : Memory Camera Mode / M.Player Mode : Memory
Player Mode
The <M.Cam Mode> and the <M.Player Mode> are only enabled on
VP-D375W(i)/D975W(i).
Power Switch
<M.Player Mode>
<M.Cam Mode>
-
-
0
1.
2.
3.
4. [Power]
[CAMERA] [PLAYER]
[Power]
[Power]
0
<Camera Mode> <Player Mode>
[Power]
[Mode]
VP-
D375W(i)/
D975W(i)
M.Cam
M.Cam Mode M.Player Mode
0
0
0
0
0
[Power] [OFF]
AA-E9
0
0
0
0
[Mode]
[Mode]
<M.Player Mode>
<M.Cam Mode>
/ M.Player
VP-D375W(i)/D975W(i)
0
0
19 19