Voice + Function - Samsung VP-D371i Owner's Instruction Manual

ENGLISH
Playback

VOICE + Function

The Voice+ function works only in <Player>
mode. page 19
When you want to play back or record a tape-
recorded movie on other AV device, you can
transfer the voice sound incoming from the
internal microphone of your camcorder, instead of
the audio signals on a pre-recorded tape.
1. Connect the provided Audio/Video Cable to the
AV Jack of the Camcorder.
2. Connect the other end of the cable to the
VCR/DVD Recorder/TV by matching the colours
of the terminals.
3. Set the [Power] switch to [PLAYER].
4. Set the [Mode] switch to [TAPE].
(VP-D375W(i)/D975W(i) only)
5. Insert the tape you wish to play back in this
camcorder.
6. Press the [Start/Stop] button on a point where
you want during the playback.
Voice+ icon ( ) is displayed on the screen
and <VOICE+> will flicker on the screen for a
while.
Sound incoming from the internal microphone will be
transferred to the connected AV device, instead of
the pre-recorded sound on a tape.
7. To cancel the function, press the [Start/Stop] button again.
[ Notes ]
VOICE+ is available only when the Audio/Video cable is
connected. If other cable (DV cable or USB cable (VP-D375W(i)/
D975W(i) only)) is connected, VOICE+ function may not operate
properly.
If you perform [ (STOP)], [√ √ (PLAY/STILL)], [œ œ œ œ (REW)] or
[√ √ √ √ (FF)] button when you operate Voice+ function, Voice+
function will be deactivated.
During the VOICE+ process, the functions of [MENU] button or
[PHOTO] button do not work.
The VOICE+ function does not affect the original sound
on the recorded tape.
Sound is transferred from the internal microphone on this
camcorder to the connected AV device, when using the Voice+
function. So take care that this microphone is not blocked.
Adjust the sound volume on the connected external device.
(TV, etc.)
Howling may occur near the speaker of an external device,
please keep the camcorder at a distance from the external
device.
Before connecting, make sure that the volume on the external
device is turned down: forgetting this may cause howling from
the external device's speakers.
VOICE
TV
VCR
Signal flow
Audio/Video Cable
VP-D371(i)/D371W(i)/
VP-D375W(i)/D975W(i)
D372WH(i)
5
√
SP 0:01:53:10
6
√ 0:01:53:10
SP
Voice+
Voice
0
Camcorder
Audio/Video
Cable
0
1.
AV
0
2.
VCR/DVD
3. [Power]
0
4. [Mode]
0(
5.
6.
[Start/Stop]
Voice+
<VOICE+>
7.
60min
0
[ ]
VOICE
DV USB
VOICE+
Voice
√ √ PLAY/STILL
√ √ √ √ FF
VOICE+
0
VOICE+
60min
Voice+
0
<Player>
19
AV
0
[PLAYER]
[TAPE]
VP-D375W(i)/D975W(i))
0
0
0
AV
0
[Start/Stop]
0
VP-D375W(i)/D975W(i)
0
STOP
/
/ œ œ œ œ REW
0
[MENU] [PHOTO]
0
AV
0
0
0
0
0
67 67