Usb Interface (Vp-D375W(I)/D975W(I) Only); Using Usb Interface; Usb Vp-D375W(I)/D975W(I); Usb - Samsung VP-D371i Owner's Instruction Manual

Digital video camcorder
Hide thumbs Also See for VP-D371i:
Table of Contents

Advertisement

ENGLISH

USB Interface (VP-D375W(i)/D975W(i) only)

Using USB Interface

Transferring a Digital Image through a USB Connection
The Camcorder supports both USB 1.1 and 2.0 standards.
(Depends on the PC specification)
You can transfer a recorded file on a Memory Card to your PC
via a USB connection.
If you transfer data to a PC, you need to install the software (DV
Driver, Video Codec, DirectX 9.0) supplied with the Camcorder.
USB Connection Speed depending on the System
High speed USB connection is supported by Microsoft (Windows) device drivers only.
Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.
Windows XP - High speed USB on a system with Service Pack 1 or later installed.
Windows VISTA - High speed USB on a system with Service Pack 1 or later installed.
System Requirements
CPU
Intel
®
Pentium 4™ , 2GHz
®
OS(Operating System)
Windows
2000/XP/VISTA(32bit)
* Standard installation is recommended.
Operation may not assured if the above OS has been upgraded.
Memory
512MB
HDD capacity
2GB or more
Resolution
1024 x 768 dots 24bit Color

USB

USB2.0 High Speed
USB interface is not supported on Windows
systems.
System requirements mentioned above are recommendations. Even on a system that
satisfies the requirements may not ensure the operation depending on the system.
[ Notes ]
On a slower PC than recommended, movie playback may not be smooth or video
editing may take a long time.
On a slower PC than recommended, movie playback may skip frames or operate
unexpectedly.
Intel
®
Pentium III™ or Pentium 4™ is a trademark of the Intel Corporation.
Windows
®
is a registered trademark of the Microsoft
All other brands and names are property of their respective owners.
Operations are not guaranteed for all of the recommended computer environments
mentioned above.
Do not connect the Camcorder to a PC using both DV and USB cables. It may not
operate properly.
In <M.Cam> or <M.Player> mode, be sure that the Memory Card is inserted into
Camcorder before connecting USB cable. If no Memory Card or an unformatted
Memory Card is inserted, PC will not recognize your Camcorder as a removable disk.
USB Streaming requires Video Codec, DV Driver and DirectX 9.0.
If you disconnect the USB cable from the PC or the Camcorder during the data
transfer, the data transfer will stop and the data may be damaged.
If you connect the USB cable to a PC using a USB HUB or with other devices at
the same time, it may cause conflict and may not work properly. If this occurs,
remove all other USB devices and try the connection again.
Windows System
®
VISTA(64bit) and Macintosh operating
®
Corporation.
USB
VP-D375W(i)/D975W(i)
USB
USB
USB
DV
USB
USB
Microsoft (Windows)
Windows 2000 -
Service Pack 4
Windows XP -
Service Pack 1
Windows VISTA -
Service Pack 1
CPU
Intel
®
Pentium 4™ , 2GHz
OS
Windows
®
2000/XP/VISTA 32
0
512MB
2GB
1024 x 768
24
USB
USB2.0
Windows
®
VISTA 64
Macintosh
0
0
[
]
Intel
®
Pentium III™
Pentium 4™
Windows
®
Microsoft
®
Corporation
DV
USB
<M.Cam>
<M.Player>
0
0
USB
/ DV
0
USB
0
0
USB 1.1
2.0
/ DirectX 9.0 0
/
0
USB0
USB0
USB0
Windows
USB
0
Intel Corporation
0
0
0
0
0
USB
DirectX 9.00
USB
USB
USB
0
0
0
0
0
0
93
93

Advertisement

Table of Contents
loading

Table of Contents