Xerox DocuPrint C3290 FS Features Setup Manual page 11

Step 4: Using CentreWare IS to Create an Email Address
1. Launch your web browser.
2. Enter the printer's IP address in the browser's Address field. You will see the printer's home
page. For instructions on how to obtain the Printer IP address, see Frequently Asked Questions
on page 13.
Email
3. Double-click the
4. If you want to change the automatically assigned address ID, click the
Number
check box, and then enter a value from 1 to 100 for the Address ID.
Name
5. In the field, enter the recipient's name.
Email Address
6. In the
OK
7. Click the button. The email address is added to the printer email address book.
Note: Email addresses in the address book appear on the printer when information is updated in the
Address Book Editor menu or toolbar.
Step 5: Using CentreWare IS to Set up for Scanning to an FTP Server
To create an address for the scanner using CentreWare IS:
1. Launch your web browser.
2. Enter your printer's IP address in the browser's Address field. You will see the printer's home
page. For instructions on how to obtain the Printer IP address, see Frequently Asked Questions
on page 13.
Address Book
3. Click
Server Address Book
4. Under
Directory Listing
5. In the
Name
a. In the
Server Address
b. In the
c. If the FTP server is not using the default port, enter a
Share Name
d. Leave the
Save Changes
6. Click the
Step 6: Setting Up the Fax
1. Verify that the fax phone line is connected.
2. From the control panel:
a. Press the System button.
b. Select the Admin Menu.
c. Select the Fax Settings.
d. Select your country.
e. Enter your fax number (this number prints on the header of the faxes).
You can now use the following steps to enter addresses using CentreWare IS.
Setting up the Printer Features Connecting over Ethernet (Network)
icon to open an
field, enter the recipient's email address.
.
Individual Directory
, click
Add
, click the
field, enter the name that you want to appear in the Address Book.
field, enter the IP address of the FTP server.
Server Path
and
button to create the new address.
Email Address
dialog box.
.
button of any blank address.
Port Number
fields blank.
7
Specify an Address
.