Wall Mounting Instructions - Haier HDY60M Owner's Manual

WALL MOUNTING INSTRUCTIONS

The dryer can be mounted on the wall in the inverted position only by
following these instructions.
Invert the dryer so that the control panel is at the bottom (see figure 3)
this allows easier access to the controls.
1. Determine the location of the dryer on the wall and mark the
bracket position.
A minimum 50 mm is needed between the top of the dryer and
the celling for ease of installation;
If mounting above a washing machine, allow sufficient room to
open the lid of the washer.
Tools required
For plaster/
Wooden wall
Wall mounting kit includes
Description
2. Fix the wall hanging brackets to the wall securely (eg. into the stud).
If the studs are too far apart, fit a timber slat to the studs then mount the
brackets onto the slat. The distance between each is 553 mm as per
diagram.
Drill&3mm Bit
Philips head screwdriver
Plastic Spacers
Wall hanging brackets
Hanging hook
Wood screws, 12gx50mm
Screws for hanging hooks
and plastic spacers.
553 mm
9
1
1
2
2
2
4
6
Wood screw