Driving Position Memory System - Acura 2008 TSX Owner's Manual

Driving Position Memory System

Your vehicle has a memory feature
for the driver's seat position.
Two seat positions can be stored in
separate memories. You select a
memorized position by pushing the
appropriate button or appropriate
remote transmitter (Driver 1 or
Driver 2).
This setting can be linked or
unlinked with the remote transmitter.
To customize the setting ''MEMORY
POSITION LINK'', see page
Storing a Driving Position in
Memory
Store a driving position only when
the vehicle is parked.
1. Turn the ignition switch to the ON
(II) position. You cannot add a
new driving position to the
memory unless the ignition switch
is in the ON (II) position. You can
recall a memorized position with
the ignition switch in any position.
2. Adjust the seat to a comfortable
104 . position (see page
Driving Position Memory System
INDICATORS
3. Press and release the MEMO
138 ). button on the driver's door. You
will hear a beep. Then, both
indicators in the memory buttons
will start to blink. Press and hold
one of the memory buttons (1 or
2) within 5 seconds after you press
the MEMO button. When the
system completes storing a new
driving position, you hear two
beeps. The indicator in the stored
memory button will come on.
MEMO BUTTON
MEMORY BUTTONS
CONTINUED
143