Acura 2008 TSX Owner's Manual page 311

Replacing a Front Side Marker/
Front Parking Light Bulb
1. To change the bulb on the driver's
side, start the engine, turn the
steering wheel all the way to the
right, then turn off the engine. To
change the bulb on the passenger's
side, turn the steering wheel to the
left.
HOLDING CLIPS
2. Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
3. Pull the inner fender cover away
from the fender and bumper.
4. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
SOCKET
BULB
5. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
CONTINUED
Lights
305