Acura 2008 TSX Owner's Manual page 223

To go back one step in a command
process, say, ''Go back,'' or press
the Back button.
If nothing is said while the HFL is
listening for a command, the HFL
will time out and stop its voice
recognition. The next time you
press the Talk button, the HFL
begins listening from the point at
which it timed out.
To end a command sequence at
any time, press and hold the Back
button, or press and release the
Talk button, wait for the beep, and
say, ''Cancel.'' The next time you
press the Talk button, the HFL
begins from its main menu.
When you finish a command
sequence, the HFL goes back to
its main menu. For example, when
you store the name, ''Eric,'' the
HFL response is, ''Eric has been
stored.'' The next time you press
the Talk button, you will be at the
main menu.
Setting Up the System
The voice of the HFL can be set to
male or female (U.S. models only).
Also, the incoming notification can
be set to a ring tone, a prompt, or no
notification.
To set up the system, do this:
1. Press and release the Talk button.
After the beep, say ''System.'' The
HFL response is, ''System options
are setup and clear.''
Bluetooth HandsFreeLink
2. Press and release the Talk button.
After the beep, say ''Setup.'' The
HFL response is ''Would you like
male or female prompts?''
3. Press and release the Talk button.
After the beep, say ''Male'' or
''Female,'' depending on the
system voice you want. The HFL
response is, ''Male (Female)
prompts have been selected.
Would you like an audible
notification of an incoming call?''
CONTINUED
217