Acura 2008 TSX Owner's Manual page 71

VSA Activation Indicator
This indicator has three functions:
It comes on as a reminder that you
1.
have turned off the vehicle
stability assist (VSA) system.
It flashes when VSA is active (see
2.
page 268 ).
It comes on along with the VSA
3.
system indicator if there is a
problem with the VSA system.
You will also see a ''CHECK VSA
SYSTEM'' message on the multi-
information display (see page
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. For more information, see
page .
268
Turn Signal and
Hazard Warning
Indicators
The left or right turn signal indicator
blinks when you signal a lane change
or turn. If an indicator does not blink
or blinks rapidly, it usually means
one of the turn signal bulbs is
burned out (see pages
Replace the bulb as soon as possible,
since other drivers cannot see that
you are signaling.
When you press the hazard warning
button, both turn signals blink. All
turn signals on the outside of the
82 ). vehicle should flash.
Instrument Panel Indicators
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. If this indicator comes on at
any other time, there is a problem in
the ABS. If this happens, take the
vehicle to your dealer to have it
304 and 306 ).
checked. With this indicator on, your
vehicle still has normal braking
ability but no anti-lock function. You
will also see a ''CHECK ABS
SYSTEM'' message on the multi-
information display (see page
For more information, see page
Anti-lock Brake System
(ABS) Indicator
83 ).
261
65
.