Acura 2008 TSX Owner's Manual page 123

Wiper Setup
When ''WIPER SETUP'' is shown on
the multi-information display, the
action of the windshield wipers can
be changed. To do this, refer to the
following procedure.
Front Wiper Action
With ''WIPER SETUP'' shown on the
multi-information display, press the
SEL/RESET button on the steering
wheel. The display changes to
''FRONT WIPER ACTION'' as
shown above.
Press the SEL/RESET button, then
press the INFO button.
Multi-Information Display
Each time you press the INFO
button, the display changes from
''WITH VEH SPD,'' to
''INTERMITTENT,'' and then to
''EXIT.''
Press the INFO button to select
''WITH VEH SPD'' or
''INTERMITTENT,'' and enter your
selection by pressing the SEL/
RESET button.
CONTINUED
117