Mounting The Expansion Ksu (Eksu) - Vodavi Starplus Triad-S Installation Manual

KSU Installation

Mounting the Expansion KSU (EKSU)

The Expansion KSU consists of a plastic cover, a metal base frame
designed for wall mount installation. The EKSU contains a power
transformer and expansion interface board (EIB). The EKSU MUST be
mounted above the BKSU. Before installing the BKSU on the wall, the wall
mounting plate that is assembled in the bottom side of the EKSU, must
be extended for wall mounting and the fastener provided with the EKSU
must be assembled with the EKSU.
After positioning the EKSU above the BKSU:
1. Mark the location of the two screws to mount the BKSU.The EKSU
2. Drill pilot holes in the two locations marked, insert the screws and
3. Mount the Expansion KSU on the screws and tighten the screws
Interconnection is achieved via an amphenol type connector and power
cable. The amphenol connector is included and connects the EKSU to the
BKSU on the right side through connectors labeled EXP as shown:
must NOT be mounted on a masonry or dry wall surface; a wooden
backboard is required. The EKSU is mounted with two #10 or larger,
1 ½ inch or longer screws.
tighten leaving about ½ inch exposed.
securely.
2-9