Introduction
Introduction
As with any sophisticated communications device, installation of the
STARPLUS
competent technician. To assure easy servicing and reliable operation,
several factors must be considered when planning the system
installation. The installation proceeds in these major steps:
Installing the
installation instructions are followed.
Site Preparation
General Site Considerations
The first step is to locate an acceptable site for the common equipment
(KSUs, boards, etc.). When locating a mounting site for the KSUs, the
following points must be considered:
Triad-S
System requires the care and forethought of a
Site Preparation
KSU and Power Supply (PS) Installation
PCB Installation
System Wiring
Keyset and Terminal Installation
Basic Installation Check-Out
System Programming and Verification
STARPLUS
The KSUs are designed for wall mounting and should not be
mounted directly to a masonry or plasterboard wall. It is
recommended that a 1/2 inch plywood backboard be firmly
mounted to the wall, and the KSU and MDF be mounted to the
backboard.
Triad-S
System is quick and efficient if these
2-3