Table of Contents
Advertisement
Sound controls (continued), SRS WOW
sound effects, dual
headphones mode, stable sound
Super Woofer
To use an external Super Woofer connect it to the Woofer
connection on the back of the television.
Select AV connection in the SET UP menu.
1
Press
to highlight Woofer and using
e
2
select External.
AV connection
PC/HDMI1 audio
HDMI1 audio
HDMI setting
EXT2 input
Woofer
Back
Watch TV
MENU
EXIT
SRS WOW
®
Sound Effects
SRS WOW
®
is a suite of audio effects which use the stereo
signals being broadcast to produce enhanced sound from
the television's speakers. If mono sound is broadcast only
TruBass will be available.
SRS 3D gives a rich sound experience, FOCUS
concentrates the sound and gives the effect of it coming
from the centre of the television, TruBass enhances the
lower bass frequencies.
Press MENU and select the SOUND menu.
1
Use
or
to highlight WOW then press OK.
f
e
2
WOW
SRS 3D
FOCUS
TruBass
Back
Watch TV
MENU
EXIT
Press
to highlight SRS 3D and using
e
3
select between On or Off.
or
z
x
•
]
]
WOW, SRS and
symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
(analogue
or
z
x
PC
soundtrack in more than one language, the DUAL feature
Digital
AV
External
This feature controls the volume through the headphones.
In Mode1 the television volume controls the headphones
2
On
Off
The Stable sound feature limits high volume levels on the
Off
21
only),
to highlight FOCUS and press
Then press
e
4
to select between On or Off.
or
z
x
Highlight TruBass and use
5
Low or High to suit your preference.
NOTE: This feature is not available through
headphones.
Dual – analogue only
If a programme or film is being broadcast with a
allows selection between them.
Select the SOUND menu.
1
to highlight Dual then press
Use
e
2
choose between Dual 1 or Dual 2.
Headphone Mode
and the speakers.
In Mode2 the headphones work independently and the
volume is controlled by the Headphone Level only.
In the SOUND menu. Press
1
Headphone then
or
z
x
Mode2.
to highlight Headphone Level then
Use
e
press
or
to adjust the volume.
z
x
Stable Sound
TV speakers, preventing the extreme changes in volume
that can occur when channels are changed or a
programme switches to a commercial.
Select the SOUND menu.
1
Use
to highlight Stable sound then press
e
2
or
to select On or Off.
z
x
®
®
to select Off,
or
z
x
or
to
z
x
to highlight
e
to select Headphone
®
Advertisement
Table of Contents
