Questions And Answers - Toshiba RV55* Digital Series Owner's Manual

Questions and
Below are the answers to some of the most common queries.
For more information go to www.toshiba.co.uk
Q
Why is there no sound or picture?
A
Check the television is not in standby mode. Check
the mains plug and all mains connections.
Q
There is a picture, but why is there little or
no colour?
A
When using an external source, for instance, a
poor quality video tape, if there is little or no colour,
improvements may sometimes be achieved. The colour is
factory set to Auto. to automatically display the best
colour system.
To check that you have the best colour:
With the external source playing, select Manual
1
setting from the SET UP menu.
Manual setting
Colour system: Auto.
EXT2 A
Store
OK
Back
MENU EXIT
With or choose between Auto., PAL,
f e
2
SECAM, NTSC 4. 43 or 3. 58.
Q
Why doesn't the video/DVD being played
show on screen?
A
Make sure the VCR or DVD player is connected to
the television as shown on page 7, then select the
correct input by pressing .
B
Q
Why is there a good video picture but no
sound?
A
Check all lead connections.
Q
Why is there a picture but no sound?
A
Check the volume has not been turned down or that
sound mute has not been selected.
V C R
Watch TV
43
Answers
Q
Why is the VCR/DVD picture in black and
white?
A
Check the correct input has been chosen,
S-VIDEO or AV. See AV connections page 39.
Q
What else can cause a poor analogue
picture?
A
Interference or a weak signal. Try a different
television station. Manual fine tuning may help.
Select the Manual tuning menu. Highlight the
1
station and press OK, then press
Manual fine tuning.
Using or adjust to get the best picture and
f e
2
sound. Press OK and then EXIT.
Manual tuning
Manual fine tuning
1 I A C 22
OK Store
MENU Back EXIT Watch TV
Q
Why don't the controls on the front of the
television work?
A
Check that Panel lock is not ON.
Q
Why doesn't the remote control work?
A
Check the side switch on the remote control is in TV
mode.
Check the batteries aren't dead or inserted incorrectly.
Q
Why is there a message permanently on
the screen?
A
Remove it by pressing
i +
Q
Why is the DTV main menu unavailable?
A
Another mode is selected. Press A/D to select DTV.
to select
x
+2 B B C 1
.