Installation Instructions; Television Location; Start Up - Haier HTF20R21 User Manual

Installation Instructions

Unpacking your TV
• Remove all packing materials. This includes the styrofoam and all adhesive tape
holding the TV accessories. Inspect and remove any remains of packing, tape or
printed materials before using the TV.

Television Location

• The TV must not be placed in sunlight or bright lights, including
reflections.
• The TV must be kept away from excessive heat or moisture.
• The TV must be kept away from magnetic equipment such as external
speakers, motors and fans.

Start Up

Follow the steps below to get your TV connected and ready for
watching.
1. Plug in your TV . Plug the cord
into the two-prong outlet.
2. Hook up your TV. Connect cable
or antenna to the provided
connection on the back of the TV.
Note: TV antenna or cable wire is
not included with the television set.
You need to purchase an antenna if
you are not going to hook up cable
service. If you have a cable service
then you must have an existing cable
wire that your local cable company
had provided at the time of your
cable installation that needs to be
connected.
3. Put batteries in the remote
control. Place two AAA size
batteries (batteries supplied) into the
remote control compartment by
matching its + and – end of each
battery.
4. Turn on the TV. You can turn
on the TV by pressing the power
button on the TV set or Remote
Control.
English
batteries
power button
6