Windshield Defrosting And Defogging; To Defog Inside Windshield; To Defrost Outside Windshield - Hyundai EON Owner's Manual

Features of your vehicle

WINDSHIELD DEFROSTING AND DEFOGGING

-
WARNING
Windshield
heating
Do not use the or
during cooling operation
extremely humid weather. The dif-
ference between the temperature of
the outside air and that of the wind-
shield could cause the outer sur-
face of the windshield to fog up,
causing loss of visibility. In this
case, set the mode selection to the
position and fan speed control
to the lower speed.
• For maximum defrosting, set the tem-
perature control to the extreme
right/hot position and the fan speed
control to the highest speed.
• If warm air to the floor is desired while
defrosting or defogging, set the mode
to the floor-defrost position.
• Before driving, clear all snow and ice
from the windshield, rear window, out-
side rear view mirrors, and all side win-
dows.
• Clear all snow and ice from the hood
and air inlet in the cowl grill to improve
heater and defroster efficiency and to
reduce the probability of fogging up the
inside of the windshield.
6 48
position
in

To defog inside windshield

1. Select any fan speed except "0" posi-
tion.
2. Select desired temperature.
3. Select the
4. Select the outside (fresh) air position.
5. Press the air conditioning button.
(if equipped)
OHA041050

To defrost outside windshield

1. Set the fan speed to the highest posi-
tion.
2. Set the temperature to the extreme
hot position.
or position.
3. Select the
OHA041051
position.