Table of Contents

Advertisement

Lap belt

To fasten your seat belt:
To fasten a 2-point static type belt, insert
the metal tab (1) into the locking buckle
(2). There will be an audible "click" when
the tab locks into the buckle. Check to
make sure the belt is properly locked and
that the belt is not twisted.
B220A04NF-1
Correct
With a 2-point static type seat belt, the
length must be adjusted manually so it
fits snugly around your body. Fasten the
belt and pull on the loose end to tighten.
The belt should be placed as low as pos-
sible on your hips, not on your waist. If
the belt is too high, it could increase the
possibility of your being injured in an
accident.
Safety features of your vehicle
OEN036030
When using the rear center seat belt, the
buckle with the "CENTER" mark must be
used. (if equipped)
Too high
Shorten
B220B01NF
OHA031011
5 13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents