Back-up light
Back-up light bulb
5. Remove the socket from the assembly
by
turning
the
counterclockwise until the tabs on the
socket align with the slots on the
assembly.
6. Remove the bulb from the socket by
pulling the bulb out.
7. Insert a new bulb by inserting it into
the socket.
8. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
OHA071033
High mounted stop light
replacement (if equipped)
socket
1. Open the tailgate.
2. Remove
the
counterclockwise.
3. Push in the three stud bolt. The high
mounted stop light assembly will
slighty pop out.
OHA071034
4. Disconnect
connector (1) by pressing the clip.
nut
by
turning
it
Maintenance
OHA071035
the
bulb
electrical
9 55