Wheel Replacement; Tyre Traction; Tyre Maintenance; Tyre Sidewall Labeling - Hyundai EON Owner's Manual

Wheel replacement

When replacing the metal wheels for any
reason, make sure the new wheels are
equivalent to the original factory units in
diameter, rim width and offset.
WARNING
A wheel that is not
correct size may adversely affect
wheel and bearing life, braking and
stopping abilities,
characteristics, ground clearance,
body-to-tyre clearance, snow chain
clearance, speedometer
odometer calibration, headlight aim
and bumper height.

Tyre traction

Tyre traction can be reduced if you drive
on worn tyres, tyres that are improperly
inflated or on slippery road surfaces.
Tyres should be replaced when tread
wear indicators appear. To reduce the
possibility of losing control, slow down
whenever there is rain, snow or ice on
the road.
the

Tyre maintenance

handling
In addition to proper inflation, correct
wheel alignment helps decrease tyre
wear. If you find a tyre is worn unevenly,
and
have your dealer check the wheel
alignment.
When you have new tyres installed,
make sure they are balanced. This will
increase vehicle ride comfort and tyre
life. Additionally, a tyre should always be
rebalanced if it is removed from the
wheel.
Maintenance
1
2
1

Tyre sidewall labeling

This information identifies and describes
the fundamental characteristics of the
tyre and also provides
identification number (TIN) for safety
standard certification. The TIN can be
used to identify the tyre in case of a
recall.
1. Manufacturer or brand name
Manufacturer or Brand name is shown.
5,6
7
4
3
I030B04JM
the tyre
9 33