Table of Contents
Advertisement
Advanced Chipset Features
We would not suggest you change the chipset default setting unless you really need it.
CMOS Setup Utility-Copyright (C) 1984-2002 Award Software
Top Performance
Configure DRAM Timing
x CAS Latency Setting
x DRAM RAS Active Time
x DRAM RAS Precharge Time
x DRAM RAS to CAS Delay
AGP Aperture Size
: Move Enter:Select
F5:Previous Values
Top Performance
If you wish to maximize the performance of your system, set "Top Performance" as "Enabled".
Disabled
Enabled
Configure DRAM Timing
Warning: Wrong DRAM Timing may make system can't boot .Clear CMOS to overcome wrong Timing
issue)
Auto
Manual
CAS Latency Setting
This feature allows you to select the CAS latency Time, When any DDR DIMM installed.
2T
2.5T
Advanced Chipset Features
+/-/PU/PD:Value
F6:Fail-Safe Defaults
Figure 4: Advanced Chipset Features
Disable this function. (Default Value)
Enable Top Performance function.
Will be automatically detected by BIOS. (Default Value)
Set Configure DRAM Timing to Manual.
Set CAS Latency Setting to 2T.
Set CAS Latency Setting to 2.5T.
[Disabled]
[Auto]
Auto
6T
3T
3T
[64MB]
F10:Save
ESC:Exit
F7:Optimized Defaults
3 1
BIOS Setup
Item Help
Menu Level
F1:General Help
Advertisement
Table of Contents
