Cpu Configuration; Advanced Chipset Features - Gigabyte AMD785G Manual

MPS Revision
This option is only valid for multiprocessor motherboards as it specifies the version of
the Multiprocessor Specification (MPS) that the motherboard will use.
Quiet Boot
The optional settings are Enabled and Disable.
Disabled: Display normal POST message.
Enabled: Displays OME logo instead of POST message.

CPU Configuration

CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
Module version: 14.14
AGESA Version: 6.1.3.0
Physical Count: 1
Logical Count: 4
AMD Phenom™II X4 945 processor
Revision: C2
Cache L1: 512KB
Cache L2 : 2048KB
Cache L3 : 6MB
Speed : 3000MHz, NB Clk : 200MHz
Able to Change Fre: YES
UCode Path level: 0x100086
GART Error Reporting
Microcode Update
Secure Virtual Mchine Mode
AMD Cool&Quiet Control
C1E Support
ACPI SRAT Table
 : Move
Enter: Select
F5: Discard Charges

Advanced Chipset Features

The Advanced Chipset Features Setup option is used to change the values of the
chipset registers.
computer.
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
Memory Configuration
Internal Graphics Config
PCI Express Configuration
HDMI Audio
NB Power Management Features
Primary Video Controller
 : Move
Enter: Select
F5: Discard Charges
NB Power Management Features
Dynamic clock gating for IOC/NT/MCU/CFG.
CPU Configuration
Disabled
Enabled
Enabled
Enabled
Enabled
+/-/: Value
F6: Standard Defaults
These registers control most of the system options in the
Advanced Chipset Features
Press Enter
Press Enter
Press Enter
Enabled
Auto
PCI-GFX0-GPP-IGFX
+/-/: Value
F6: Standard Defaults
Enable or Disabled the building of
Disabled
F10: Save ESC: Exit
F7: Optimized Defaults
F10: Save ESC: Exit
F7: Optimized Defaults
20
Help Item
ACPI SART Table
F1: General Help
Help Item
Options
Disabled
Enabled
F1: General Help