Table of Contents
Advertisement
9
10
11
Soft-off by Power Button
Off
Suspend
System after AC Back
Last State
Off
On
IRQ [3-7, 9-15], NMI
Disabled
Enabled
ModemRingOn/WakeOnLAN
An incoming call via modem awakes the system from its soft-off mode./When set at Enabled, an input
signal comes from the other client/server on the LAN awarks the system from a soft off state if
connected over LAN.
Disabled
Enabled
PME Event Wake UP
When set at Enabled, any PCI-PM event awarkes the system from a PCI-PM controlled state
Disabled
Set MODEM Use IRQ to 9.
Set MODEM Use IRQ to 10.
Set MODEM Use IRQ to 11.
The user press the power button once, he can turn off the system.
(Default Value)
The user press the power button once, then he can enter suspend mode.
When AC-power back to the system, the system will return to the Last state
before AC-power off.
When AC-power back to the system, the system will be in "Off" state.
(Default Value)
When AC-power back to the system, the system will be in "On" state.
Disable this function.
Enable this function. (Default value)
Disable Modem Ring on/wake on Lan function.
Enable Modem Ring on/wake on Lan. (Default Value)
Disable this function.
3 9
BIOS Setup
Advertisement
Table of Contents
