Gigabyte GA-8SIML User Manual page 21

GA-8SIML Motherboard
E ) FDD (Floppy Connector)
1
D ) IDE1/ IDE2 (IDE1/IDE2 Connector)
1
O) F_AUDIO (Front Audio Connector)*
MIC
Front Audio (R)
Front Audio (L)
GND
*For PCB 1.1ver only
1
1
GND
Rear Audio (R)
Rear Audio (L)
Important Notice:
Please connect first harddisk to IDE1
and connect CDROM to IDE2.
If you want to use "Front Audio" connector,
you must move 3-4,5-6 Jumper. In order to
utilize the front audio header, your chassis must
have front audio connector. Also please make
sure the pin assigment on the cable is the same
as the pin assigment on the MB header. To find
out if the chassis you are buying support front
audio connector, please contact your dealer.
1 8