Programming Of Ring Signal Tone Character - Ericsson Dialog 4220 Lite User Manual

Settings
Ô
Program
0
(
Ô Õ
Program
78

Programming of ring signal tone character

There are 10 different programmable ring signal tone characters on
your phone, each corresponding to a digit between 0 and 9.
Note: If you use melodies to signal incoming calls (4222
Office phone only), this will replace the tone character. See
section
Press.
9
On the 4222 Office phone, the current tone character is displayed.
– )
Press the corresponding digit.
The phone rings with the chosen tone character.
Press to finish programming.
"Melody Ringing" on page
Dialog 4220 Lite/Dialog 4222 Office
81.