Table of Contents
Advertisement
*
See Appendix C for complete paper specifications.
** It is recommended that multi-part forms be used in the front push
or pull position.
*** Continuous paper with labels cannot be used with the rear push
tractor. To use them, install the optional tractor unit in the front push
or pull position.
**** Always load multi-part forms with 7 parts (one original plus 6
copies) from the front or bottom slot onto the pull tractor.
Note:
If the printed image is smeared, you may need to set the paper
thickness lever one position higher to improve print quality.
If the printed image is faint or has many gaps, you may need to set
the paper thickness lever one position lower to improve print quality.
Printing on Continuous Paper
2
2-5
Advertisement
Table of Contents
