Installing Epson Status Monitor 2 - Epson FX-980 User Manual

Installing EPSON Status Monitor 2

Note:
If you installed EPSON Status Monitor 2 when you installed the printer
software, you do not need to install it again.
To install the Status Monitor, follow these steps:
1. Make sure Windows is running. Insert the printer software
CD in the CD-ROM drive. (If you are using printer software
floppy disks insert Disk 1 in a disk drive. Then double-click
the drive icon.
2. If a dialog box appears, click Quit.
3. Click Start, and select Run.
4. Type D:\STM2\SETUP.
5. Click OK and then follow the instructions on the screen.
Using EPSON Status Monitor 2
6
6-3