Interpreting The Access Lamp - Epson EasyMP EMP-735 Setup Manual

Inserting and Removing Cards
2
Press the eject button again.
Enough of the wireless LAN card will be ejected so that you can grasp the edge
of the card and pull it straight out of the slot.
Caution :
Be sure to press the eject button back in to prevent it from being broken or damaged.

Interpreting the Access Lamp

The colour of the card slot access lamp indicates the access status of the memory
card as follows when the memory card is inserted.
State
Green
OFF
Red
The card slot access lamp is not on when the wireless LAN card is inserted in the
card slot. The communication status can be determined by the access lamp on the
wireless LAN card as follows.
State
Yellow
Green
OFF
18
Data is being read from the memory card.
Not accessing the memory card.
An error occurred whilst reading the memory card.
Communication status
The wireless LAN card is ready for use.
Data is being transmitted.
The projector is off or the wireless LAN card is not inserted
correctly.
: ON
Access status
: ON
: OFF
: OFF