Features Menu - Daewoo DTH-28 Setup Manual

FEATURES MENU

See section near the end of section DAILY USE for a more detailed explanation of these functions.
(For operating instructions see page 9, HOW TO USE THE SUB-MENUS)
1. When switched to ON:
Prevents the use of the TV set without remote control
2. Wake up function
This function is only selectable when the clock is set.
The TV set turns on from stand-by at the WAKE TIME
with the programme entered on the WAKE PROG. line.
Put the TV set on stand-by with the remote control
3. Shared with WAKE TIME.
4. TV clock setting
This function allows user to enter the time manually.
Note : If you turn off the set with the main power button,
the clock setting is lost. An automatic attempt is made to
set the clock again at power on.
5. Programme Information function
This status information is under the editorial control of the
transmitting station, and can contain the programme title.
6. This function is only selectable when the default picture format is
currently active (see also FORMAT SELECTION, AUTO setting,
page 8). This selects the default format to be used only when the
format selected with the ZOOM button (A15) is AUTO, and no
picture format signalling data is received.
7. LANGUAGE menu entry.
LANGUAGE MENU
- Select the preferred LANGUAGE by use of the CURSOR LEFT (A7),
RIGHT (A20) buttons, and the CURSOR UP (A6) or DOWN (A21) buttons.
- Press the OK button (A18) to confirm the selection (the choice will be
highlighted in red).
Note : The languages shown are subject to modification without prior notice.
13
1. Adjust this value ON or OFF.
- In stand-by mode, the stand-by indicator flashes red and
green to indicate the CHILD LOCK is set.
- The front panel TV buttons (B7, B8, B9) become inactive
and the TV will only respond to the remote control.
2. - Switch the WAKE UP function OFF or 'ON' (the time will be
shown e.g. 07:15) with the remote control CURSOR LEFT
(A7) /RIGHT (A20) buttons
- Enter the wake up time with the remote control 0...9
NUMBER (A3) buttons
3. Adjust TV turn-on program number
4. Adjust TV clock. Clock will start at 0 seconds upon entry
of the 4th figure.
The prog. no. which can be used to automatically seize the
time at turn on can be entered here.
5. Adjust this value ON or OFF.
- When ON, the information (if available) is displayed
upon change of channel, or with use of the RECALL button.
- When OFF, no information is displayed.
6. Choose your preferred default format with the remote control
CURSOR LEFT (A7) /RIGHT (A20) buttons.
Note : For 4:3 TVs FULL SCREEN is represented by 4:3.
For 16:9 TVs FULL SCREEN is represented by 16:9.
7. The currently selected LANGUAGE is displayed.
Press the OK button (A18) to access the menu and change
the selection.