Features Menu - Daewoo DUB-2850DT Manual Instruction

FEATURES MENU

See section near the end of section DAILY USE for a more detailed explanation of these functions.
(For operating instructions see page 9, HOW TO USE THE SUB-MENUS)
1. When switched to ON:
Prevents the use of the TV set without remote
control
2. Wake up function
This function is only selectable when the clock
is set. The TV set turns on from stand-by at the
WAKE TIME with the programme entered on the
WAKE PROG. line. Put the TV set on stand-by
with the remote control
3. Shared with WAKE TIME.
4. TV clock setting
This function allows user to enter the time
manually.
Note : If you turn off the set with the main power
button, the clock setting is lost. An automatic
attempt is made to set the clock again at power
on.
5. This function is only selectable when the default
picture format is currently active (see also
FORMAT SELECTION, AUTO setting, page 8). This
selects the default format to be used only when
the format selected with the ZOOM button (A18)
is AUTO, and no picture format signalling data
is received.
12
FEATURES FEATURES
CHILD LOCK
WAKE TIME
WAKE PROG. D 999
CLOCK - - : - -
ZOOM AUTO 16 : 9
▲▼ Position ◄► ON / OFF
MENU Exit
1. Adjust this value ON or OFF.
- In stand-by mode, the stand-by indicator flashes
red and green to indicate the CHILD LOCK is set.
- The front panel TV buttons (B4, B5, B8, B8)
become inactive and the TV will only respond to
the remote control.
2. Switch the WAKE UP function OFF or 'ON' (the
time will be shown e.g. 07:15) with the remote
control CURSOR LEFT (A12) /RIGHT (A12) buttons
- Enter the wake up time with the remote control
OFF
0...9 NUMBER (A6) buttons.
OFF
3. Adjust TV turn-on program number
D: Digital chanel
A: Analog chanel
4. Adjust TV clock. Clock will start at 0 seconds
upon entry of the 4th figure.
5. Choose your preferred default format with the
remote control CURSOR LEFT (A12) /RIGHT (A12)
buttons.
Note : For 4:3 TVs FULL SCREEN is represented
by 4:3. For 16:9 TVs FULL SCREEN is repre-
sented by 16:9.