Advertisement
•
4. CLEANING YOUR REFRIGERATOR
•
Before you clean the
The refrigerator may
r e f r i g e r a t o r, unplug the
smell during the initial
power cord. To clean,
operation, but the
use a soft piece of
odour will fade away
cloth. Wash with warm,
when the refrigerator is
soapy water rinse and
cooled suff i c i e n t l y.
d r y.
•
•
Do not sprinkle water
Put the parts back in
directly on the
their original positions
refrigerator itself.
after cleaning.
•
Use a soft cloth for
cleaning the interior
and exterior of the
r e f r i g e r a t o r.
7
How to Install
Location
Install the refrigerator in a convenient location away from extreme heat and
cold. Allow at least 6cm clearance between the refrigerator and side wall so
that the door may open for a fully usable interior and the refrigerator may have
good air circulation. The refrigerator is not designed for recessed installation.
ßö
Select a strong and level floor.
ßö
Keep 6cm of space between the
refrigerator
and the walls.
Leveling
Level the refrigerator so that it rests solidly on the floor without rocking. There
are two leveling feet at each front corner. Turn to the left to raise a corner, to
the right to lower it. Use shims under the rear corners, if necessary.
ßö
If you want the refrigerator door to close naturally, adjust the leveling feet
so that the front of the refrigerator is raised by 5mm.
ßö
If you want the refrigerator to remain motionless when open, adjust the
leveling feet so that all four corners are leveled with each other.
N O T E : All packing materials used to ensure safety during transport
should be removed. You must remove the transport safty packing
and wipe off any possible adhesive tape residues with a
petroleum-based cleaner or similar solvent.
8
Advertisement
