GE GTQ130PANR User And Care Manual

1. Installation Instructions

Suitable Installation Place

Where the floor is solid and leveled Where ventilation is good
• Unstable installation may cause vibration • Leave more than 6cm from 3 sides for
and noise. ventilation.
• Wooden floor or carpet beneath the • Insufficient spacing may lead to
refrigerator may be decolourized. noise,vibration, lowering of refrigerating
perforormance and energy efficiency.
• Doors may not close properly if the
refrigerator is not leveled.
Grounding
Grounding terminal is the yellow/green one connected to the power cord in the back of refrigerator.
Grounding is necessary
all the time
Grounding by using
Bury copper plate to 25 cm deep in the ground with ground wire connected.
grounding wire
Grounding by using Short-circuit breaker is a must where the floor is always wet, for example, fish shop,
short-circuit breaker
restaurant kitchen etc.
Grounding is not necessary
in case of using side-grounded outlet.
You should not connect the water pipe, gas pipe, telephone line,
ground wire to lightening-rod.
There can be explosion or fire.
* The refrigerator is grounded if a 3-prong plug is used (depending on local electric code.)

Correct usage of Refrigerator

Plug in the refrigerator right * See page
after installation.
Set the fresh food compartment' * When the surrounding temperature is hot in midsummer, do not open and shut the
temperature to "7" to perform
doors too often after installation.
preparatory run for 2 or 3 hours.
When the inside is cold enough,
put the foods in.
Where there is little or no heat, moisture
• Direct sun light, heat of stove or gas range
may decrease the refrigerating
performance.
• Avoid moisture and water for prevention of
rusting corrosion and electrical problems.
• Locate the refrigerator on concrete / cement
floor or solid board or plank.
Side
Grounded
outlet
for details.
2
1
Grounding wire