Introduction; Features; Introduction Features; Installation - NEC FS-8002 Instruction Manual

INTRODUCTION

Features

Double Window
You can enjoy two programs simultaneously by splitting the screen in two.
16:9 screen
You can select a desired 16:9 (wide screen) screen mode for movies as well as the normal 4:3 picture mode.
A variety of AV terminals for external equipment connection.
MTwo sets of video / audio inputs on the rear and one set on the front.
MS-VIDEO terminals.
MOne set of A/V output (TV signal) terminals.
MOne set of SCART JACK input / output on the rear.
Selectable picture and selectable sound
Allows one-touch selection of your favorite picture quality and tone quality.
NICAM and German stereo / bilingual broadcasts receivable
PIP (Picture-in-Picture)
The PIP function can show another picture on the main picture simultaneously.
Off-timer and Wake-timer
Turns off the TV automatically and will turn it back on at a preset time.
Curtain Effect
When the power on / off, the screen is displayed like a curtain and you can hear a beep.
Split screen
You can enjoy two programs simultaneously (Main picture & Teletext Picture).
Exclusive terminals of DVD (Cr & Cb)
You can enjoy better DVD-Picture with use the Exclusive terminals of DVD (Cr & Cb).
INTRODUCTION

Installation

M INSTALL the unit in a room where direct light will not fall upon the screen.
Tonal darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended
for comfortable viewing.
M ALLOW enough space between the unit and the wall for proper ventilation.
M AVOID excessively warm locations to prevent possible damage to the cabinet or components.
M RATED VOLTAGE: 110-240V~, 50 / 60Hz.
Automatic degaussing
All colour television receivers are sensitive to magnetic influences usually caused by either moving the receiver from one
place to another or using certain electrical appliances near the receiver. This residual magnetism, as it is called,
sometimes causes distortion which gives rise to "blotchy" areas of colour in the picture. To avoid these effects, the
receiver incorporates an automatic degaussing switch.
This circuit removes any residual magnetism in the metal parts of the picture tube and ensures that each time the
receiver is turned "ON" using the main switch, the purity of the colours displayed on the screen remains true and lifelike.
If the unit is moved or made to face a different direction, the main switch must be off at least 30 minutes in order for the
automatic degaussing circuit to operate properly.
3