Connecting At Av2(Scart) - NEC FS-8002 Instruction Manual

CONNECTING AT AV2(SCART)

When connecting other equipment, please ensure you turn the main switch OFF to prevent any
M
damage to the equipment.
L Connecting to a HI-FI STEREO VIDEO(STEREO mode is defaulted)
1. Prepare the connective plug for picture / sound.
2. Connect the VIDEO input/output terminal with the VIDEO2(AV2) terminal.
3. Press the TV / VIDEO / DVD(
4. Select the STEREO mode with the STEREO/BILINGUAL SELECT button.
L Connecting to a MONO VIDEO(STEREO mode is defaulted)
1. Use a two wire RCA cable to make a connection with a MONO VIDEO.
If L audio input of TV is connected to audio out of VIDEO, the sound will come from both speakers.
2. If L-INPUT of the TV is connected to the audio out of VIDEO, the mode will be
STEREO : The sound will only come from one speaker.
M
L-INPUT : The sound will come from both speaker.
M
R-INPUT : The sound will not come at all.
M
3. If R-INPUT of the TV is connected to the audio out of VIDEO, the mode will be
STEREO : The sound will only come from one speaker.
M
L-INPUT : The sound will not come at all.
M
R-INPUT : The sound will come from both speaker.
M
) button on the Remote control and select AV2.
REAR SCART TERMINAL
SOUND OUTPUT
REAR SCART TERMINAL
SOUND OUTPUT
(2)
PICTURE OUTPUT
HI-FI STEREO VIDEO
(2)
PICTURE OUTPUT
MONO VIDEO
27