Before Setting Oven Controls; Oven Control Functions - Frigidaire 316417139 Use & Care Manual

Removing & Replacing Oven Racks
To remove, pull the rack forward until it stops. Lift up front of rack and slide out. To replace, fit the rack onto the guides
on the oven walls. Tilt the front of the rack upward and slide the rack back into place.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with
the various functions of the oven as described below.
BAKE PAD—Used to
select the bake
function.
BROIL PAD—
Used to select
the variable
broil function.
TIMER ON/OFF PAD— Used to set or cancel the
minute timer. The minute timer does not start or
stop cooking.

Before Setting Oven Controls

Oven Vent Location
The oven vent is located below the backguard. When the oven is on, warm air is
released through this vent. This venting is necessary for proper air circulation in the oven
and good baking results. DO NOT BLOCK THE OVEN VENT.
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATING THE OVEN). Always use oven mitts when using the oven.
Arranging Oven Racks with 6 Rack Positions
To bake on a single rack, place the rack on position 2 or 3. To bake on 2 racks,
place the racks on positions 1 & 3.
Recomended Rack Positions for Broiling, Baking & Roasting:
Food
Broiling meats, chicken or fish.
Cookies, cakes, pies, biscuits & muffins.
Frozen pies, angel food cake, yeast, bread, casseroles, small
cuts of meat or poultry.
Turkey, roast or ham.

Oven Control Functions

Note: The time of day must first be set in order to operate the oven.
CLOCK SET PAD— Used
to set the time of day.
UP & DOWN ARROW PADS— Used
along with the function pads to
select oven temperature, time of
day, clean time & minute timer.
CLEAR/OFF — Used to clear any function previously
entered except the time of day and minute timer. Press
CLEAR/OFF to stop cooking.
6
Rack Position
4 or 5
2 or 3
1
1 or Roasting Shelf