AEG COMPETENCE B5741-4 User Information page 49

Replacing the centre glass panels
1. Insert the centre panels at an angle
from above into the section of the
door in which the handle is located,
one after the other (
2. Lower the centre panels down and
push them towards the lower edge
of the door as far under the retain-
ing frame as they will go (
Replacing the upper glass panel
1. From above, insert the upper-most
panel at an angle into the section of
the door in which the handle is lo-
á
cated ( ).
2. Lower the panel. Place the glass
against the pressure spring at the
handle, and in front of the retaining
frame at the lower edge of the door.
Push it into the frame (
The glass plates must be firmly at-
tached.
Re-hang the door
á
).
à
).
à
).
49