Pyrolytic Cleaning - AEG COMPETENCE B5741-4 User Information

Pyrolytic cleaning

1
Warning: The oven gets very hot during this process. Keep small chil-
dren away.
1
Important! Before carrying out the pyrolytic cleaning process, all re-
movable parts, with the exception of the side rails, must be removed
from the oven.
3
If you use the oven shelf runners that are available as special accesso-
ries, these must be removed before pyrolytic cleaning.
If the oven shelf runners are still in place, 'C1' appears in the time dis-
play.
The pyroluxe process then cannot be started due to a safety cut-out
that protects the oven shelf runners.
Pyroluxe
1. First remove the worst of the residue manually.
2. Select oven function Pyroluxe ® Cleaning
– "3:15" appears in the display,
– Cook time flashes for approx. 5 seconds.
Pyrolytic cleaning then starts.
3
The Oven Light does not work.
When the temperature set is reached, the door is locked.
The bars of the heat indicator light up, until the door is unlocked again.
Changing the length of the Pyroluxe
1. Proceed as described in the section Pyroluxe
2. As long as Cook time
roluxe using
"2:15" or "3:15".
Cook time
Pyrolytic cleaning then starts.
3
If Cook time
and then perform the setting procedure.
Changing the Pyroluxe switch off time
The Pyroluxe switch off time can be changed using the End time
clock function (within 2 minutes of setting the Pyroluxe).
When are the different pyroluxes set:
P2 - 2:15 = Pyroluxe Quick: For a light degree of soiling,
P1 - 3:15 = Pyroluxe Intensive: For a heavy degree of soiling.
44
is flashing select the desired length of the py-
or :
flashes for approx. 5 seconds.
is no longer flashing, press the Select
.
button again