Phaser - Native Instruments Razor Manual

Fig. 5.42 Comb Notch Filter.
▪ CUTOFF: Cutoff frequency (semitones) of the filter. If TUNED is off it sets the frequency
of the first peak. If TUNED is on it sets the frequency distance of the second peak to
the first peak which is tuned to the first partial.
▪ SHAPE: Shape of the notches. Ranges from narrow to broad.
▪ PHASE: Phase offset to the recurring comb peaks.
▪ STRETCH: Stretches the filter curve from flanger-like to phaser-like.
▪ TUNED: If on the first peak of the comb is tuned to the first partial (when PHASE set to
0).
5.11.8

Phaser

Special filter for phaser effects.
Modulating the PHASE parameter with a saw shaped LFO results in ever rising or falling phas­
er if the mod amount is set to 50 or -50
Fig. 5.43 Phaser effect filter.
▪ CYCLES: Number of phaser cycles.
▪ AMOUNT: Amount of Filtering.
▪ PHASE: Phase offset to the recurring phaser cycles.
▪ RAMP: Amount Ramp. Sets the increase of filtering amount from low partials to higher
ones. At minimum the filtering amount is the same for all partials.
Overview of RAZOR Ensemble
Filter 2
RAZOR - Manual - 48