Graphical Display - Native Instruments Razor Manual

5.6

Graphical Display

Multifunctional display. The content of the graphical display in the upper mid is selected
by the radio buttons underneath it. Most of them select a 'partial' display: The level or the
panning of each partial along the frequency axis is shown.
Fig. 5.6 Graphical Display.
OSC 1: Shows the spectrum of oscillator 1.
▪
OSC 2: Shows the spectrum of oscillator 2.
▪
FILTER 1: Shows the filter curve of filter 1.
▪
FILTER 2: Shows the filter curve of filter 2.
▪
▪ CLIPPER: Shows the
curve is red in case
▪ STEREO: Shows the partial panning resulting from the stereo effects.
▪ OUTPUT: Shows the spectrum of the output of the additive engine. That is after the 'Ster­
eo' effects and prior the 'Dynamics' effects.
▪ SCOPE: Shows the time signal at RAZORs output. That is after the 'Master' volume con­
trol. There is one scope for each stereo channel. The length of one wave cycle is made
fit to screen.
▪ AUTO: If on the display automatically selects the synthesizer section that is edited. So if
you turn a knob in oscillator 1 the display will jump to
off In case of unwanted jumps caused by parameter automation from the VST host or
from a MIDI controller.
SPECTRAL CLIP threshold curve and its effect on the partial levels. The
SPECTRAL CLIP is active, grey otherwise.
Overview of RAZOR Ensemble
OSC 1. AUTO needs to be turned
RAZOR - Manual - 26
Graphical Display