2.2.10 Distortion
•
Drive: Determines the amount of distortion applied to the sound. Higher values increase
the distortion effect.
•
Output: sets the output of the module
2.2.11 Phaser
•
Depth: sets the amount of LFO modulation applied to a signal. Higher amounts result in
a stronger phaser effect.
•
Level: sets the dry/wet balance of the phaser
2.2.12 Amp
•
Bass: boosts or cuts the level of the lower frequencies
•
Treble: boosts or cuts the level of the higher frequencies
Scarbee Mark I - User Manual – 13