How To Get Razors Vocoder To Work; Using Reaktors Internal Sample Player; Using The Audio Input Of A Soundcard In Reaktor Standalone - Native Instruments Razor Manual

6

How to get RAZORS Vocoder to work

In the filter 1 section a Vocoder can be selected as filter type. In the following paragraph
we explain how to feed an audio signal into the Vocoder and how to include RAZOR in a
DAW in order to use its Vocoder.
For more information on the vocoder please read its description in the filter 1 section of this
manual.
6.1

Using REAKTORS internal sample player

A simple way to feed audio in the Vocoder is to play back audio files with the built in sam­
ple player of REAKTOR or REAKTOR PLAYER. It can be found on the left hand side of the
'Player Recorder' bar located below the Instrument panel. In case it is hidden
needs to be checked.
Player Recorder
For more info on the sample player please refer to the REAKTOR and REAKTOR PLAYER
manual.
6.2

Using the audio input of a soundcard in REAKTOR standalone

In REAKTOR or REAKTOR PLAYER standalone version the audio input from a sound card
is routed into the vocoder. Please make sure the right sound card and the right audio input
of that soundcard is selected in
Settings... > Routing > Input
For more info on the soundcard settings please refer to the REAKTOR and REAKTOR PLAYER
manual.
File > Audio MIDI Settings... > Audio and File > Audio MIDI
.
How to get RAZORS Vocoder to work
Using REAKTORS internal sample player
View > Show
RAZOR - Manual - 71