Removing The Secondary Hard Disk; Replacing The Secondary Hard Disk - NCR RealPOS 7458 Hardware Service

Removing the Secondary Hard Disk

1. Lift the Hard Disk Release Latch on the Hard Disk Bracket and
slide the drive assembly to the side as shown below to disengage it
from the chassis.
2. Disconnect the Hard Disk cables.

Replacing the Secondary Hard Disk

1. Verify the jumper settings on the Hard Disk is set to Master.
Master Setting (Pins 7-8)
Chapter 3: Hardware Service 3-23
Release Latch
7 5 3 1
8 6 4 2
Hard Disk
20330
20421