Oracle Application Server B32100-01 Installation Manual page 96

Groups Required to Configure or Deinstall Components
Oracle Internet Directory
Table 5–4 (Cont.)
To Configure This Component
OracleAS Wireless
OracleAS Reports Services
OracleAS Forms Services
OracleAS Personalization
OracleBI Discoverer
To Determine the Metadata Repository Used by OracleAS Single Sign-On
Run the following command (all on one line):
1.
prompt> ldapsearch -h oidhostname -p oidport -D cn=orcladmin -w password
-b "orclapplicationcommonname=orasso_ssoserver,cn=sso,cn=products,
-s base "objectclass=*" seealso
Values you need to provide:
oidhostname - name of the computer running Oracle Internet Directory. Example:
dbmachine.mydomain.com.
oidport - port number on which Oracle Internet Directory is listening. Example:
389.
password - password for the cn=orcladmin user.
If the command in the preceding step does not return the name of the metadata
2.
repository, then run the following commands:
a.
5-6 Oracle Application Server Installation Guide
Groups Required to Configure Components
User Must Be a Member of ALL Listed Groups:
IAS & User Management Application Admins
■
iAS Admins
■
Mid-Tier Admins or Repository Owners group for the metadata
■
repository
Component Owners group for the OracleAS Wireless component
■
Note: This group is applicable only when you are installing
additional
the first
OracleAS Wireless
installation as the same
performed the first installation. If you want to allow a different
Oracle Internet Directory
Wireless
group for the Wireless application entity.
In addition, the user must be one of the owners of the OracleAS
■
Wireless application entity. To determine the name of the
OracleAS Wireless application entity, run the following
command from the first OracleAS Wireless installation:
prompt> $ORACLE_HOME/wireless/bin/getAppEntityName.sh
Then add the user as a component owner for this application
entity. You can do this using the Deployment Delegation Console
or the Oracle Directory Manager.
iAS Admins
■
Mid-Tier Admins or Repository Owners group for the metadata
■
repository
cn=oraclecontext"
Run this command first to get the "orclreplicaid" value, which you need for the
next command.
prompt> ldapsearch -h oidhostname -p oidport -D cn=orcladmin -w password
OracleAS Wireless
instances. It does not apply for
OracleAS Wireless
installation. For subsequent
installations, you can perform the
Oracle Internet Directory
user to install
, you have to add this user to the Component Owners
user who
OracleAS