Oracleas Cold Failover Cluster (Infrastructure): Overview Of Installation Steps; Oracleas Cold Failover Cluster (Infrastructure): Details Of Installation Steps - Oracle Application Server B32100-01 Installation Manual

Installing an OracleAS Cold Failover Cluster (Infrastructure) Configuration
URL for:
Application Server Control
Oracle Application Server Middle Tiers
You can install and run the middle tiers on other nodes (nodes that are not running
OracleAS Infrastructure). During installation, you set up the middle tiers to use
services from the OracleAS Infrastructure installed on the shared storage device.
You can also install and run the middle tiers on the cluster nodes without using an
OracleAS Cold Failover Cluster configuration for the middle tiers. In this case, you
install middle tiers using the regular installation process. If you do this, make sure the
middle tier ports will not conflict with the OracleAS Infrastructure ports when a
failover occurs.

8.3.1 OracleAS Cold Failover Cluster (Infrastructure): Overview of Installation Steps

To set up an OracleAS Cold Failover Cluster (Infrastructure) configuration, perform
these steps:
Table 8–1 Overview of Installation Steps for OracleAS Cold Failover Cluster (Infrastructure)
Step
1. Perform Pre-Installation Steps
2. Install OracleAS Infrastructure
3. Perform Post-Installation Steps

8.3.2 OracleAS Cold Failover Cluster (Infrastructure): Details of Installation Steps

This section lists the steps for installing OracleAS Infrastructure in an OracleAS Cold
Failover Cluster (Infrastructure) configuration.
Step 1 Perform Pre-Installation Steps
Perform the pre-installation steps listed in
OracleAS Cold Failover
Step 2 Install OracleAS Infrastructure
For OracleAS Cold Failover Cluster (Infrastructure), you install both OracleAS
Metadata Repository and Oracle Identity Management in the same Oracle home by
selecting Identity Management and Metadata Repository in the Select Installation
Type screen. This option creates a new database for the OracleAS Metadata Repository
and a new Oracle Internet Directory.
Note that if there is an existing Oracle Application Server 10g database on the system
where you plan to install OracleAS Infrastructure, you must perform the steps in
Section 8.2.5, "Modify listener.ora file for Existing Database"
8-8 Oracle Application Server Installation Guide
Example URL
http://vhost.mydomain.com:1156
Description
Pre-installation tasks, described in
Section 8.2.1, "Map the Virtual Hostname and Virtual IP
■
Address"
Section 8.2.2, "Set Up a File System That Can Be Mounted
■
from Both Nodes"
Section 8.2.3, "Review Recommendations for Automatic
■
Storage Management (ASM)"
Install OracleAS Infrastructure on the shared storage.
This post-installation step configures the CSS daemon. This step
is required only if you are using ASM (Automatic Storage
Management) feature of the Oracle database, and you do not
have an existing Oracle database.
Section 8.2, "Pre-Installation Steps for
Cluster".
Section 8.2, include:
prior to installation.